American Modified Style Guide 2026: Three Complete Looks for a Gladiator, Civic and Tesla
Some builds look finished and some look like a pile of parts. The difference usually isn't money. It's whether every piece tells the same story: the same finish, the same light color, the same attitude from the front bumper to the tail lights.
American Modified sells enough parts to tell a lot of stories, from Jeep fog light covers to Civic wings and Tesla diffusers. This style guide skips the grille aisle the brand is known for and builds three complete looks from its other parts, with the fitment lines and October 2026 prices that matter.
Who This Guide Is For
It's for owners who already like their vehicle and want it to look intentional. You might drive a 2018+ Wrangler JL or 2020+ Gladiator JT, a 2016–2020 Civic hatchback, or a 2017–2022 Tesla Model 3. Each look below takes two to four parts, and each part's fitment is spelled out in its product title. Read that title twice before you add anything to the cart.
The Three Rules of a Cohesive Build
- Pick one light color story. Amber reads rugged and retro. White reads modern and clean. Smoked lenses tie either one together.
- Match the finish. Glossy black next to matte black looks like an accident. Many American Modified parts list their exact finish in the title, such as "Glossy Black" or "Crystal Black Pearl."
- Front and rear should agree. If you change the face, change the tail too, or the car looks like two different projects.
Look 1: The Amber-Lit Gladiator
This look is all about warm amber light low on the front and a dark, smoked rear. Start with the LED Front Bumper Fog Light Covers with Turn Signal ($175.99). They frame the factory fog lights with an amber and white LED ring and fit the 2020+ Gladiator JT and 2018+ Wrangler JL. One big catch: the listing says they fit only models with the injection-molded Rubicon-style front bumper, not the JL Sport or the Rubicon steel bumper.
Up top, the Front Hood Protector Stone Guard with Amber LED Lights ($164.99) sits along the leading edge of the hood. It is matte black polypropylene with five amber LED marker lights that run off the vehicle's ACC circuit, and the brand pitches it as protection from stone chips and bug stains.
Finish at the back with the Smoked Black LED Tail Lights for the 2020+ Gladiator JT ($208.99). The listing describes a full-LED design with parking, brake, side marker and reverse functions, an OEM-grade ABS housing rated IP67, and plug-and-play wiring into the factory connectors. Note that they are listed for trucks with factory halogen tail lights.
Total for the look: $549.97 before any savings, and it clears the $75 free-shipping line many times over.
Look 2: The Street-Ready Civic Hatchback
The 10th-gen Civic hatchback already has a sporty shape. This look sharpens it with gloss black and crisp white-and-amber light. The anchor is the Rear Spoiler Wing in Glossy Black ($189.99), made from FRP and sold as a painted part for 2017–2020 Civic hatchback 5-door models only. The brand recommends professional installation, and the box is long: about 55 x 17 x 4 inches.
Up front, the X Style LED Front Bumper Fog Lights ($139.99) put a bold "X" into each fog light pocket. They fit the 2016–2020 Civic hatchback; the white wire connects to ACC and the other plug goes into the original fog light plug. Add the LED Side Marker Lights with Turn Signal ($99.99) to carry amber light down the flanks.
For the rear, the LED Sequential Tail Lights for the 2017–2021 Civic Hatchback ($429.99) complete the story. The listing describes a fiber-optic style full-LED design, says they meet DOT and FMVSS 108 requirements, and lists fitment for the FK7 hatchback and FK8 Type R. Professional installation is required, according to the brand.
Total for the look: $859.96 for all four, or start with the wing and fog lights at $329.98.
Look 3: The Black-Pearl Tesla Model 3
Teslas look sleek from the factory, so the trick is small, dark accents that make the car look lower and sharper. Start with the Front Lip Spoiler for the 2017–2022 Model 3. The Crystal Black Pearl version is $99; the Platinum White Pearl version is $329.99. Then add the Rear Diffuser Bumper Lip with LED Light, $125 in Crystal Black Pearl or $199.99 in Platinum White Pearl. The brand strongly recommends professional installation for both and notes that an instruction manual isn't included.
Finish with two easy details. The Side Camera Decoration Cover Trim ($65.99) is glossy carbon-fiber-look ABS that attaches with automotive double-sided tape and fits the 2021–2022 Model 3 and 2019–2022 Model Y. The matte black Fender Mud Guards ($65.99) fit the 2017–2023 Model 3, mount in the original holes and need no drilling, according to the listing.
Total for the look in black: $355.98.
Parts to Start Your Look
Prices seen in October 2026. Check the fitment line and live price before you check out.
Prices change often; the brand's site always shows the current price.
The Three Looks Side by Side
| Look | Vehicle | Light story | Parts total |
|---|---|---|---|
| Amber-Lit Gladiator | 2020+ Gladiator JT (front parts also fit 2018+ JL) | Amber up front, smoked LED rear | $549.97 |
| Street-Ready Civic | 2016–2020 Civic hatchback | White "X" fogs, amber markers, sequential rear | $859.96 |
| Black-Pearl Tesla | 2017–2022 Model 3 | Dark trim with an LED diffuser | $355.98 |
Before You Order Your Look
- Free shipping on domestic orders over $75 to the 48 contiguous states, per the site banner; truck freight and oversize charges can still apply.
- Orders before 3pm PST ship the same day, and ground delivery normally takes 2–5 business days. Multi-part looks may arrive in several boxes from different warehouses.
- Cancelling costs 10%, and a 15% restocking fee may apply to non-defect returns within 30 days. Confirm fitment for every part first.
- Save on the bill: the newsletter sign-up advertises 10% off your next order. We didn't find a public promo code.
See Today's American Modified Prices →
Styling FAQ
Should I install everything at once?
Not necessarily. Start with the part you'll see most, usually the front lighting, then add the rear so the look stays consistent.
Do these parts need wiring work?
Some do. The stone guard and Civic fog lights connect to an ACC circuit, while the Gladiator tail lights are listed as plug-and-play. The brand recommends professional installation for many body parts.
Will the Gladiator fog covers fit my Wrangler Sport?
No. The listing excludes the JL Sport and the Rubicon steel bumper; it fits the injection-molded Rubicon-style bumper.
Can I mix glossy and matte parts?
You can, but most cohesive builds stick to one finish. Check each title for the finish before ordering.
The Bottom Line
A build looks finished when its lights and finishes agree. Pick your vehicle's look, start with the part that changes the face, then match the rear. When your list is ready, check our American Modified deals page before you order.
How we wrote this: King Review researched American Modified using its official website, product listings, fitment notes, prices and policies in October 2026. We haven't personally tested these products and we don't invent ratings or discount codes. We may earn a commission if you buy through our links, at no extra cost to you.